ROTARY SEALS

C5R
The profile C5R was developed for rotary seals. Herewith, low-pressure channels on rotors can be sealed one sided. Although, using simple geometry, for a special shaped interior sealing lip, a good seal effect was achieved. The seal is designed for medium pressure ranges.

ADVANTAGES ARE
- more pressure resistance than shaft seals according to DIN 3760 1)
- easy to install
- also available in EPDM and FKM
- observe sliding-speed

APPLICATION RANGE  
working pressure:  ≤ 2,0 MPa (20 bar)
operation temperature:  - 30 °C to + 100 °C > FKM 200 °C
sliding speed:  ≤ 0,2 m/s recommendation: PxV ≤ 0,3 2)

Often used with mobile- and machine tool-hydraulic, with low pressure swivel screw-fittings, as well as endseals, with rotary feed through, of construction equipment.

MATERIAL
Standard-elastomer, with a hardness of approximately 84 Shore A, made of NBR, FKM, EPDM.

MOUNTING INSTRUCTIONS
To ensure a perfect seal function the groove width must be larger than the seal width (look at chart). The C5R is easy to install in closed grooves. So the seal won?t be damaged, don´t pull it over sharp edges. Edges within the seal housing have to be provided with radii (look at mounting layout).
In certain cases (high temperature, speed, specific resistance to pressure a.s.o.) please contact with our application technology.

1) slidding speed to be observed
2) product from pressure (MPa) and sliding speed (m/s) should not exceed 0,3

d D H L Bestell Nr.
45 57 7,5 8,5 C5R 4057 NB584
60 72 8,5 9,5 C5R 6010 NB584
65 77 6 7 C5R 6037 NB584
90 102 8,5 9,5 C5R 9010 NB584
95 107 7,5 8,5 C5R 9049 NB584
95 112 10 11 C5R 9050 NB584
110 130 10 11 C5R B010 NB584
115 135 10 11 C5R B050 NB584
130 150 10 11 C5R D050 NB584
150 170 10 11 C5R F020 NB584
180 200 10 11 C5R J020 NB584
220 245 12,5 13,5 C5R M045 NB584
 

Further sizes on request.

Branch Düren
Westring Dichtungstechnik GmbH
Talbenden 4
D-52353 Düren
Tel:  +49 24 28 - 80 29 - 0
Fax:  +49 24 28 - 80 29 - 29
E-Mail:  dueren@westring-dichtungstechnik.de
Öffnungszeiten
Mo-Do: 8:00 - 16:30 Uhr
Fr: 8:00 - 15:00 Uhr

Branch Köln
Westring Dichtungstechnik GmbH
Rudi-Jaehne-Str. 4
D-50769 Köln-Merkenich
Tel:  +49 221 - 5 99 20 18 / 19
Fax:  +49 221 - 5 99 53 62
E-Mail:  koeln@westring-dichtungstechnik.de
Öffnungszeiten
Mo-Do: 8:00 - 16:30 Uhr
Fr: 8:00 - 15:00 Uhr

Branch Plauen
Westring Dichtungstechnik GmbH
Fedor-Schnorr-Straße 6
D-08523 Plauen
Tel:  +49 37 41 - 42 30 - 0
Fax:  +49 37 41 - 42 30 - 19
E-Mail:  plauen@westring-dichtungstechnik.de
Öffnungszeiten
Mo-Do: 8:00 - 16:30 Uhr
Fr: 8:00 - 14:30 Uhr