The profile C5R was developed for rotary seals. Herewith, low-pressure channels on rotors can be sealed one sided. Although, using simple geometry, for a special shaped interior sealing lip, a good seal effect was achieved. The seal is designed for medium pressure ranges.
- more pressure resistance than shaft seals according to DIN 3760 1)
- easy to install
- also available in EPDM and FKM
- observe sliding-speed
|working pressure:||≤ 2,0 MPa (20 bar)|
|operation temperature:||- 30 °C to + 100 °C > FKM 200 °C|
|sliding speed:||≤ 0,2 m/s recommendation: PxV ≤ 0,3 2)|
Often used with mobile- and machine tool-hydraulic, with low pressure swivel screw-fittings, as well as endseals, with rotary feed through, of construction equipment.
Standard-elastomer, with a hardness of approximately 84 Shore A, made of NBR, FKM, EPDM.
To ensure a perfect seal function the groove width must be larger than the seal width (look at chart). The C5R is easy to install in closed grooves. So the seal won?t be damaged, don´t pull it over sharp edges. Edges within the seal housing have to be provided with radii (look at mounting layout).
In certain cases (high temperature, speed, specific resistance to pressure a.s.o.) please contact with our application technology.
1) slidding speed to be observed
2) product from pressure (MPa) and sliding speed (m/s) should not exceed 0,3
|45||57||7,5||8,5||C5R 4057 NB584|
|60||72||8,5||9,5||C5R 6010 NB584|
|65||77||6||7||C5R 6037 NB584|
|90||102||8,5||9,5||C5R 9010 NB584|
|95||107||7,5||8,5||C5R 9049 NB584|
|95||112||10||11||C5R 9050 NB584|
|110||130||10||11||C5R B010 NB584|
|115||135||10||11||C5R B050 NB584|
|130||150||10||11||C5R D050 NB584|
|150||170||10||11||C5R F020 NB584|
|180||200||10||11||C5R J020 NB584|
|220||245||12,5||13,5||C5R M045 NB584|
Further sizes on request.