Cross-section | Profile designation | Application | Operating pressure < MPa | Temperature °C (depending on material) | Glide speed < m/s | Design information | Product details |
---|
| DLP | Pneumatics | 1 | -35 bis 180 | 1 | | |
or
Show general overview | Load overview |
DLP
The profile DLP is a very compact built, double action pneumatic seal, inside NBR standard elastomer compound.
APPLICATION RANGE
Mainly sealing of gatevalves (slide dampers), as well as clamping cylinders, mini- and short stroke cylinders.
working pressure: | ≤ 1,0 MPa (10 bar) |
operation temperature: | - 35 °C to + 80 °C, NBR > FKM bis + 200 °C < |
sliding speed: | ≤ 1 m/s |
Medium: | compressed air, maintained, as well as dry and oil-free (after initial lubrication) |
For particular high or low temperatures, please ask for special compounds.
MATERIAL
Standard compound is an approved elastomer mixture on NBR-basis, with a hardness of approximately 71 Shore A.
MOUNTING INSTRUCTIONS
The profile DLP gets snapped in place in a basic groove on the piston. To avoid damage of the sealing lips, don�t pull them over sharp or rough edges. To reach a high time of operation, it is important with operation in unoiled air, before mounting the piston, to apply a closed lubrication film inside the valve body bore or alternatively on the cylinder tube.
In certain cases (high temperature, speed, specific resistance to pressure a.s.o.) please contact with our application technology.
Download | Detailed product information (PDF 447.6 kB)