Cross-section | Profile designation | Application | Operating pressure < MPa | Temperature °C (depending on material) | Glide speed < m/s | Design information | Product details |
---|
| G6S | Hydraulics Pneumatics | 16 1,6 | -35 to 200 -35 bis 180 | 0,5 1 | | |
or
Show general overview | Load overview |
General
The U-Cup G6S is a symmetrical elastomer lip seal that can be used in both hydraulic and pneumatic applications. Due to its strongly formed sealing lips, it intensively wipes off the oil film when the piston or rod is extended without pressure. A support ring in the sealing groove is not required. Due to the symmetrical profile design, the G6S can be used as a rod seal as well as a cylinder seal.
Medium
Mineral oil-based hydraulic oils, compressed air
Material
Standard material: NBR with a hardness of approx. 85 Shore A, also available in FKM and EPDM at short notice.
Advantages
- versatile use in hydraulics and pneumatics
- available in many materials, NBR, FKM, EPDM
- very easy to install
- low friction compared to HPU seals
Installation instructions
To ensure proper function, the lip seal must have clearance in the axial direction (see dimension table). To prevent damage to the sealing lip, it must not be pulled over sharp edges. Normally the G6S can be mounted in closed grooves.
Area of application
All hydraulic and pneumatic devices for medium pressure ranges.