We are pleased that you are interested in our products.
You can reach us directly by phone, fax and e-mail. We will be happy to call you back or send you an offer for your individual application request. (The fields marked with * are mandatory)
Show general overview | Load overview |
Special dimensions on request | Request now |
NGS
The profile NGS is a two-pieced piston seal set, that consists of a frabric grooved ring and an elastomer back-up ring. Due to the little headroom, the seal set is chiefly used for the sealing of both-way impinged pistons.
ADVANTAGES ARE
- high extrusion resistance
- little place requirement
- simply mountable in open fitting areas
- suitable for mineral oils, brake fluids, emulsions and synthetic media
- also usable as rod seal with elastomer back-up ring
- dimensions for cylinder diameters according to ISO 3320
APPLICATION RANGE | |
working pressure: | ≤ 25 MPa (250 bar) |
working temperature: | - 40 °C to + 100 °C (NBR) |
- 25 °C to + 200 °C (FKM) | |
surface speed: | ≤ 0,5 m/s |
media: | Mineral oil-based hydraulic oils, brake fluids, emulsions |
Chiefly used for the sealing of both-way impinged hydraulic cylinders.
The dimensions are largely orientated on the installation guidelines of ISO 3320.
MATERIAL | |
grooved ring: | NBR-based rubber fabric (NQ011/NQ012) |
back-up ring: | NBR-elastomer (NB578) or polyacetal (POM-WK001) |
MOUNTING INSTRUCTIONS
The piston seal set profile NGS will be delivered with an elastic back-up ring. This back-up ring will be inserted loose as a closed NBR-ring or open (cut to size). We reserve it for ourselves to deliver a back-up ring made of synthetic material instead of the rubber ring. In special cases a round section seal can be mounted for the back-up ring. A divided piston is necessary for the installation. The fitting areas should conform to the set height to avoid swimming of the seal. A axial pretension, adjusted on the particular case of application, is permissible.
For special cases of application (high temperatures, speed, specific pressure, use in water, HFA-, HFB-fluids etc.) please get in contact with our consultancy service.
Do you need support in selecting the right seal or do you have any questions? We will be happy to help you directly!