We are pleased that you are interested in our products.
You can reach us directly by phone, fax and e-mail. We will be happy to call you back or send you an offer for your individual application request. (The fields marked with * are mandatory)
Show general overview | Load overview |
Special dimensions on request | Request now |
2.06
Konipac (piston seal) and Skonipac (rod seal) are single acting seal elements consisting of a circular seal ring, an elastomer for the static and one or several PTFE rings for the dynamic part and one or several back-up elements. With regard to the back-up rings the seal can be called on for managerial responsibilities.
The seal is dependent on the pressure. The circular seal ring forms the static and elastic part of the seal and gives the sealing lip contemporary the pretension it needs to achieve a good sealing even with low pressures. All kind of elastomers can be used, as the circular seal ring possesses a static function, too. Therewith a good chemical resistance and temperature stability is to be reached. The known attributes of the material PTFE are effective in the dynamnic part of the seal.
ADVANTAGES ARE
- small fitting area
- high availability also in intermediate sizes
- universal chemical resistance
- reliably sealing also at highest pressures
- high security from extrusion
- good dry operation attributes
- small breakaway torques and sliding friction
- no stick-slip even at low speed
- use even on dirty conditions like plunger pumps for mud of cement
APPLICATION RANGE | |
Working pressure: | ≤ 50 MPa (500 bar) |
Working temperature: | - 35 °C to + 100 °C |
- 25 °C to + 200 °C (depending on the O-ring) | |
Surface speed: | ≤ 3 m/s continuous |
≤ 10 m/s intermittent | |
Media: | all hydraulic fluids, e.g. water, oils, water-oilemulsions, |
flame-proof hydro-oils etc. (depending on the O-ring compound) |
Max. specific strength as guidance: 15 N/mm2
Most commonly used at the pneumatic and hydraulic cylinders, piston pumps, hydraulic pressings, machine tools, construction machines, hydraulic-pneumatic pressure translators, water hydraulics.
MATERIAL | |
Slide ring: | PT044 |
O-ring: | NBR |
INSTALLATION
To avoid the damaging of the seal sharp edges may not be overrun. Normally Konipac and Skonipac are mountable on closed grooves from a diameter of 50 mm. Divided fitting rooms are necessary with endless backup rings. On special conditions the use of assembly aids is recommendable.
For special cases of application (high temperatures, speed, specific pressure, use in water, HFA-, HFB-fluids etc.) please get in contact with our consultancy service.
|
Do you need support in selecting the right seal or do you have any questions? We will be happy to help you directly!