General
The sealing set Profile M3S consists of fabric roof sleeves, 1 support ring and 1 pressure ring. The sleeves are manufactured with a radial pre-tension on the sealing lips and thus ensure a friction-optimised and secure contact with the surfaces to be sealed. This sealing effect is reinforced by the system pressure.
Medium
Hydraulic fluids based on mineral oil, water and water-glycol emulsions
Material
Standard materials: NBR or FKM elastomers with and without hard fabric insert
Advantages
- can be used under rough conditions due to the robust design
- Can be easily adjusted to operating conditions by selecting different materials
- can be mounted split
- insensitive to pressure peaks
- multiple sequentially installed sleeves increase sealing reliability
Installation instructions
The installation space must be open on one side. The nominal dimension of the set height is equal to the length of the installation space. Oiling or greasing facilitates installation. The set can also be installed in two parts, each offset by 120°.
Area of application
Hydraulics, hydraulic presses, valve spindles, upper and lower piston presses
